DIY Damp Proofing Cream Kit includes:
Consumption rate – 115mm wall = 3.8m / tube of DIY damp proofing cream
Consumption rate – 230mm wall = 1.9m / tube of DIY damp proofing cream
*Approximation only – allows 5-10% wastage
When damp proofing a solid wall then one can drill and inject from the most accessible side. When treating cavity walls the inner and outer walls should be treated separately, drilling and injecting the cream from both sides of the wall to form a damp proof course in each. Damp plaster should be renewed to complete the rising damp treatment.
120 in stock
Simply drill a 12mm hole, 90% though the wall at 100-120mm centres along the bed joint chosen for the DPC. Inject sufficient cream to fill the hole to within 1cm of wall surface and leave it to diffuse through the wall and cure to form a chemical damp proof course. Make good with sand and cement, whist cream is in the hole or with mastic if filling after diffusion.